Burlington Forklift Training School

Burlington Forklift Training School - What Are Covered In A Forklift Training School? - Federal and industry regulators have established the criteria for forklift safety training based on their current standards and regulations. People wanting to use a forklift should complete a forklift training program before making use of one of these machinery. The accredited Forklift Operator Training Program is intended to offer trainees with the practical skills and knowledge to become a forklift operator.

Mobile Equipment and Vehicle safety rules that apply to forklift utilization involve pre-shift inspections, and rules for lifting and loading.

Prior to a shift beginning, an inspection checklist has to be done and submitted to the Supervisor or Instructor. If any maintenance problem is discovered, the machinery must not be utilized until the problem is dealt with. To indicate the machinery is out of order, the keys should be removed from the ignition and a warning tag placed in a place which is seen.

Loading safety rules comprise checking the rating capacity on the forklift nameplate and determining if the load weight falls within capacity. The forklift forks must be in the downward position when the forklift is starting up. Remember that there is a loss of around 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting should start with the driver moving to a stopped position around three inches from the load. The mast must then be leveled until it has reached a right angle with the load. Lift the forks to one inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk to warn other staff. Do not allow forks to drag on the ground.

Click to Download the pdf